ProjectBeginner
Sanding Block
Make one straight cut from a prepared strip, then fit an abrasive face to a useful hand tool.
Make a sanding blockInnovative STEM library
Guides
Step-by-step project builds, explainers, and references that connect STEM ideas to hands-on work.
Plan, make, improve
Woodworking project guides
Follow a measured plan, check the setup with your teacher, and build with care.
ProjectGeometry
Geoboard
Mark a nine-nail square grid, then use bands to investigate shapes, perimeter and area.
Build a geoboardProjectNatural materials
Twig Key Rack
Cut a base, dry-fit prepared twig hooks, and glue an arrangement for instructor mounting after full cure.
Make a twig key rackProjectWoodworking
Keepsake Box
Measure, cut, dry-fit and assemble a five-piece pine box with overlapping sides.
Build the boxProjectSaw practice
Figurines
Practice rip cuts and crosscuts, then decorate six pieces as a coordinated set.
Make figurinesProjectDesign
String Art
Plan nail spacing and connect an outline using string or Rainbow Loom bands.
Create string artPublished
Classroom-ready guides
Each guide is ready to read, reference, or pair with a related classroom tool.
Guide
Electronics
Beginner
Electronics Fundamentals
Learn Ohm's Law, AC and DC, LEDs, resistor decoding, switches, and breadboard basics.